Categories

Hot Products

News

The Movement Way Of The Valve
May 15, 2018

When the gate valve is closed, the sealing surface can be sealed only by medium pressure, that is to rely on the media only

Z41H Flange wedge Type Gate Valve

Z41H Flange wedge Type Gate Valve Pressure will seal the gate pressure to the other side of the seat to ensure that the sealing surface seal, which is the self sealing.

Most of the gate valve is a forced seal, that is, the valve closed, to rely on external forces to force the gate pressure to the seat to ensure the sealing surface of the seal. Movement mode: Gate valve of the gate with the stem for linear movement, also known as the gate valve. Usually on the lifter has trapezoidal thread, through the top of the valve nut and valve body on the guide groove, the rotation of the movement into a straight line movement, that is, the operation torque into operation Thrust. When opening the valve, when the gate lifting height equals valve diameter 1:1 time times, the fluid channel is completely unimpeded, but at run time, this position is unable to monitor. In actual use, it is the vertex of the stem as a sign, that is, the position of the open, as its full opening position. In order to consider the temperature changes in the deadlock phenomenon, usually open to the vertex position, and then back to the 1/2-1 ring, as the position of full opening valve. Therefore, the full open position of the valve is determined by the position of the gate (i.e. itinerary). Some gate valve stem nut is located on the gate, the handwheel rotates to drive the stem to rotate, and causes the gate to ascend, this kind of valve is called the Rotary Pole Gate valve or is called the Dark pole gate valve. ...


  • QR CODE
  • facebook